DigitalMedia 8G+ Receiver 100
Crestron
DM-RMC-100-C
24
DigitalMedia 8G+ Receiver 100: DM-RMC-100-C
Operations & Installation Guide – DOC. 7000C
4. (Optional) If additional changes to TCP/IP settings are desired,
do the following:
a.
Assign an IP address, IP mask, and default router for the
DM-RMC-100-C via the Crestron Toolbox (
Functions | Ethernet
Addressing
).
b.
Close the “System Info” window.
c.
In Crestron Toolbox, change the Address Book entry for the
DM-RMC-100-C so that it uses the IP address assigned in step 4a.
d.
Display the “System Info” window of the DM-RMC-100-C (click the
icon); communications are confirmed when the device information
is displayed.
Firmware
Firmware files may be distributed from programmers to installers or from Crestron
to dealers. Firmware upgrades are available from the Crestron Web site as new
features are developed after product releases. For details on upgrading, refer to the
Crestron Toolbox help file.
Check the Crestron Web site to find the latest firmware. (New users may be required
to register to obtain access to certain areas of the site, including the FTP site.)
To upgrade DM-RMC-100-C firmware:
1. Do either of the following:
If the DM-RMC-100-C is connected to a DM switcher, use the Device
Discovery Tool in Crestron Toolbox to find the IP address of the
switcher.
If the DM-RMC-100-C is being used in a standalone configuration (not
used with a DM switcher), use the Device Discovery Tool to find the IP
address of the DM-RMC-100-C.
2.
Add the IP address found in step 1 to the Address Book in Toolbox.
3.
Download the appropriate .puf file from the Crestron Web site to the PC.
4
Double-click the .puf file. The Toolbox Address Book opens.
5. From the list in the Address Book, select the DM switcher (if the
DM-RMC-100-C is connected to a switcher) or the DM-RMC-100-C (if the
DM-RMC-100-C is used in a standalone configuration), and then click
OK.
Either of the following occurs:
If the DM switcher was selected, a DM device list is displayed that
allows an upgrade to all DM devices connected to the switcher.
If the DM-RMC-100-C was selected, a DM device list is displayed that
allows an upgrade to the DM-RMC-100-C only.
In the DM device lists that are displayed, the checkbox of any item that
needs to be upgraded is automatically selected.
6. Click
Update.
7. After the process is complete, click
Recheck
to verify the upgrade.