manualshive.com logo in svg

Crestron Cameo C2N-CBF, Operations & Installation Manual

Share
Download
Crestron Cameo C2N-CBF Operations & Installation Manual Download Page 23

Crestron 

C2N/C2NI-CB Series

 Cameo

™

 Keypads

 

Supplied Parts/Assemblies – UK-Style Mounting (continued) 

QTY ITEM 

DESCRIPTION 

2 

Screws, Black, Phillips pan 
head, 4-40 x 3/16” 

Used to attach the bezel assembly to the keypad rear 
housing and switch assembly 

6 

Single row button cap 

Switch cover for a single row switch 

3 

Double row button cap 

Switch cover for two switches that function as one 

2 

Triple row button cap 

Switch cover for three switches that function as one 

2 

Single row spacer 

Switch cover for single non-operational switch 

1 

Double row spacer 

Switch cover for two non-operational switches 

1 

Triple row spacer 

Switch cover for three non-operational switches 

2 

Screws, Steel, Phillips, pan 
head, 6-32 x 7/8” 

Used only to attach assembled keypad to back box 

Assemble the keypad as described in the following steps. Refer to the 
accompanying illustration. 

1.  Place the button caps and/or spacers in position according to the 

program plan. Attach the plastic button support to the button 
caps/spacers, and put the assembled parts in place on the Rear 
Housing and Switch assembly. (Refer to the illustration for the 
standard mounting installation procedures, step 1, on page 16.) 

2.  Carefully position the bezel assembly, LED edge first, down 

and over the button caps/blanks and rotate slightly into position 
on the rear housing and switch assembly. 

3.  Hold the bezel and rear housing together and install and tighten 

the two supplied Phillips pan head, 4-40 x 3/16” cover screws 
(black), as shown in the illustration.  

Button Caps

and Spacers

Bezel

LED

Holes

LEDs

Cover

Screw

Rear Housing

and Switch

Assembly

Plastic Button

Suport

 

Operations & Installation Guide - DOC. 6346A 

Cameo™ Keypads: C2N/C2NI-CB Series  

•

  19 

Summary of Contents for Cameo C2N-CBF

















































Reviews:

No comments

Brands by name

Popular brands

Load more brands