Crestron
C2N/C2NI-CB Series
Cameo
™
Keypads
Setting the Net ID in Device Settings
Double-click the C2N-CB icon in the upper pane to open the “Device
Settings” window. This window displays C2N-CB device information.
Select the
Net ID
tab to change the Net ID, as shown in the following
figure.
C2N-CB Device Settings Window
NOTE:
This procedure sets the Net ID for the C2N-CB in the program
only. It does not automatically set the Net ID for the keypad itself.
NOTE:
SIMPL Windows automatically changes Net ID values of a
device added to a program if a duplicate device or a device with the same
Net ID already exists in the program. Always ensure that the hardware
and software settings of the Net ID match. For Net ID hardware setting
details, refer to “Identity Code” on page 10.
Cameo Symbol in Programming Manager
Programming Manager is where programmers “program” a Crestron
control system by assigning signals to symbols. For detailed information,
refer to the SIMPL program help file (F1).
Button Arrangement Mounting Option
The following illustration shows the arrangement of the buttons and
feedback LEDs on the keypad.
Operations & Installation Guide - DOC. 6346A
Cameo™ Keypads: C2N/C2NI-CB Series
•
27
