Creo Lotem 800 II Series, User Manual

Page: 27 / 43

Using the Dual-Loading Cassette (DLC) 17
3.
Ensure that the notch on the proofing tray is on the upper left corner.
The top edge of the donor must be inserted in the far edge of the
proofing tray.
Figure 8: 4-up media on proofing tray
4.
Once all the donors are appropriately situated, place the receiver on
top of the separator with the shiny side facing up.
5.
The receiver is smaller than the donor and must be centered. Use the
black tape outline on the separator to center the receiver on the tray.
6.
When done, place the proofing tray on the upper tray of the DLC.
Changing the Separator Order
If you want to change the order of colors or add colors other than the
normal CMYK colors, you simply change the order of the separators.
To change the order of the separators in the proofing tray, do the
following:
1.
Unscrew the four (4) screws on the proofing tray, and remove the
separators.
2.
Re-arrange the separators in the desired order.
Note: 4-up media is arranged vertically on the proofing tray (not horizontally like
the 8-up media). See Figure 8 on page 17.