Creo Lotem 800 II Series, User Manual

Page: 37 / 43

Using the Dual-Loading Cassette (DLC) 27
Figure 17: Stand up proofing tray
Unloading the Carrier
If a plate expose job is sent from Brisque, the carrier is unloaded
automatically. However, if you want to initiate unloading manually, do the
following:
To unload the carrier before submitting a job for plate expose:
¾
From
Routine Functions
menu, select
Loading System
and click
Unload Carrier
. The carrier is unloaded.
To unloading the carrier after submitting a job for plate expose:
¾
When a message is displayed telling you to unload the carrier, click
OK.
The carrier is unloaded.
This side up
Note: Always unload the carrier from the drum when not in use.