Configuring New Types of Media
7
11.
In the
Thickness
box
,
type the media thickness. You must verify the
media thickness with a micrometer. It should range from 0.1 - 0.35
millimeters.
12.
Click
Save
to save the new media.
The new media name appears in the
Media list
.
Repeat the above procedure to define all the media you intend to use.
To modify the parameters of existing media:
1.
From the
Media List
, select the media whose parameters you want to
edit. You can edit all parameters except
Name
.
2.
Edit the parameters as explained on page 5.
3.
Click
Save
to save the new parameters.
To delete a media set from the Media List:
¾
Select the requested media and click
Delete
.
Note:
The media names will also appear in the Current Cassette window on
Note:
To change the name of a media, you must first delete the media. Then
click
New
to configure it again.
Summary of Contents for Lotem 800 II Series
