Troubleshooting 31
To enable AutoPlay through Auto Insert Notification:
1. Click the Start button, select Settings, and then click Control Panel.
2. In the Control Panel window, double-click the System icon.
3. In the System Properties dialog, click the Device Manager tab and select your CD-ROM drive.
4. Click the Properties button.
5. In the Properties dialog, click the Settings tab and select Auto Insert Notification.
6. Click the OK button to exit from the dialog.
"
!"
The last selected preset is an inappropriate environment for the current audio file.
To switch to an appropriate environment:
1. Open the Environmental Audio control utility.
OR
Display Creative Launcher. It is found at the top or bottom of your screen (you may have to bring your
pointer to the edge of the screen to display Launcher). And then click the Environments tab.
2. In the Environment list, select “No effects” or an appropriate environment.
#
Check the following:
❑
The headphones are connected to the Line Out jack.
❑
In the Environment deck of Surround Mixer, make sure that the Speaker entry is Headphones.
$ %" %
Check the following:
❑
The rear speakers are connected to the audio card’s Rear Out jack.
❑
If you are playing sound from one of these sources:
• CD Audio
• Line In
• TAD
• Auxiliary (AUX)
• Microphone