background image

Advanced Configurations     23

!4+ 

To watch DVD movies on your PC, you can connect a Creative PC-DVD Encore Dxr2 or Dxr3, or 
MPEG2 decoder card to an external Dolby Digital (AC-3) decoder such as the DeskTop Theater speaker 
systems. In this case, disconnect the audio card’s Aux In connector from the decoder card’s Audio Out 
connector. However, if an external Dolby Digital (AC-3) decoder speaker system is not available, this 
connection is necessary.

FourPointSurround Digital 
Speaker System

Sound Blaster Live!

Digital 
Output

Connect for downmix audio only 
when a Dolby Digital (AC-3) decoder 
speaker system is not available.

Digital
DIN

MPEG2 decoder

Dolby Digital 
(AC-3) 
SPDIF In

Dolby Digital (AC-3) 
SPDIF Out jack

Analog Line and Rear Inputs

Digital
DIN

FourPointSurround
Digital Speaker 
System

Creative PC-DVD and 
DeskTop Theater 5.1
Digital Speaker System

Connects to the 
Optical Digital I/O card 
or Live! Drive
(see next page).

Minijack-to-DIN

DeskTop Theater 5.1 Digital 
Speaker System

Digital Out 
jack

Recording and Content Authoring
with Digital Output Module

Digital device

SPDIF In (RCA)

Recording to external 
digital devices supporting 
RCA SPDIF input

Digital device with 
optical input

Summary of Contents for Live 5.1














































Reviews: