background image

Using Sound Blaster Live!     15

)!/

To configure an instrument:

1. In the SoundFont dialog, click the Configure 

Instrument tab.

2. In the Select Bank list, select the bank whose 

instruments you want to configure.

3. In the Select Instrument list, select the instrument to 

configure.
In the Instrument Stack, you may see an instrument 
entry although you did not load an instrument on this 
page. The instrument can be found in a bank loaded on 
the Configure Bank tab page.

4. Click the Load button and load a SoundFont or single-

instrument (for example, .WAV) file.
The last file loaded always appears at the top of the 
Instrument Stack with an arrow pointing to it.

5. To clear an instrument from the stack, select the instrument and then click the Clear button.
6. For faster processing of SoundFont files, the files are loaded into memory. You need to set the 

maximum amount of cache memory your SoundFont files can occupy, so that your system 
performance does not suffer from insufficient memory. You can also set the caching algorithm for 
a balanced system performance.

Setting the maximum amount of 
cache memory for SoundFont files 
does not mean setting aside or 
reserving the space. The space can 
still be used by your computer or 
other files, if needed.

Summary of Contents for Live 5.1














































Reviews: