background image

General Specifications     26

@ / 

Software record and playback control of Master, Digitized Voice, and inputs from MIDI device, CD 
Audio, Line, Microphone, Auxiliary, TAD, SPDIF, Wave/DirectSound device, and CD Digital (CD 
SPDIF)

Separate bass and treble control

Front and rear balance control

Muting and balance control for individual playback sources

 -! 6 789

!

Decodes Doby Digital (AC-3) to 5.1 channels or pass-through compressed Dolby Digital (AC-3) PCM 
SPDIF stream to external decoder

Bass Redirection:  Enhances bass ouput to subwoofer

 "+2
"

6""

9

Multi-speaker technology

Professional-quality panning and mixing algorithm

Independent multiple sounds can be moved and placed around a listener

 +

Line-level analog Line input via stereo jack on rear bracket

Mono Microphone analog input via stereo jack on rear bracket

CD_IN line-level analog input via 4-pin Molex connector on card

AUX_IN line-level analog input via 4-pin Molex connector on card

TAD line-level analog input via 4-pin Molex connector on card

CD_SPDIF digital input via 2-pin Molex connector on card, accepting sampling rates of 32, 44.1, and 48 kHz

 4+

ANALOG/DIGITAL OUT (front and rear SPDIF digital outputs) via 4-pole 3.5 mm minijack on rear 
bracket

Three line-level analog outputs via stereo jacks on rear bracket, Front and Rear Line-Outs

Stereo headphone (32-ohm load) support on Front Line-Out

)

D-Sub MIDI interface for connection to external for connection to external MIDI devices.  Doubles 
as Joystick port.

AUD_EXT 2x20 pin header for connection to Optical Digital I/O card or Live! Drive

Summary of Contents for Live 5.1














































Reviews: