![background image](http://html1.mh-extra.com/html/creative/blaster-pc-m001/blaster-pc-m001_user-manual_2680779026.webp)
3-4 The Celeron™ Processor
Step 1: To assemble the retention mechanism
1. Locate the RM mounting
holes of Slot 1 on the
motherboard.
(See Figure 3-3.)
2. Align the two plastic guides
with the two ends of Slot 1.
Make sure that the two
guides face each other.
3. Insert four post pins
through the RM to secure it
to the motherboard.
4. Insert four lock pins
through the post pins to
lock the RM to the
motherboard.
Components of the Celeron Processor’s heat sink
Figure 2-4 shows the components of the heat sink for the Celeron
processor:
q
Heat Sink (HS)
q
HS retention clip
Figure 3-3: Assembling the RM.
Figure 3-4: Components of the Heat Sink.
Summary of Contents for Blaster PC M001
Page 1: ...TM M001 Motherboard...
Page 3: ...ii...
Page 14: ...The M001 Motherboard 1 5 Figure 1 1 The M001 motherboard...
Page 67: ...Printed in Singapore...