Creative Blaster PC M001, User Manual

Page: 34 / 67

4-4 Connectors
IR Connector (JP22)
You can attach a 5-pin infrared device cable to the JP22 IR connector
from an infrared receiver in order to use the infrared transfer function.
The M001 motherboard meets ASKIR and HPSIR specifications. It is
also fully compatible with Creative’s infrared receiver for a wireless
interface. The Creative infrared receiver re-routes commands it
receives from the credit card-sized Creative iNFRA Remote controller
to the COM2 serial port of the host computer.
Use the CMOS Setup Utility to enable the infrared receiver. For
details, see the section “Integrated Peripherals” on page 6-20.
Figure 4-4 shows JP22’s pin assignment and location.
CPU & AGP cooling FAN connectors (JP26 and FAN3)
The motherboard provides two onboard 12 V cooling fan power
connectors for the CPU (JP26) and AGP device (FAN3) cooling fans.
Depending on the fan’s manufacturer, the wiring and plug type may be
different. The red wire should be connected to +12 V and the black
wire should be connected to ground (GND).
Figure 4-4: JP22’s pin assignment and location.