Creative Blaster PC M001, User Manual

Page: 38 / 67

Jumper Settings 5-3
To configure the CPU bus clock multiplier
The JP11, JP12, JP13, and JP14 jumpers are used to configure the
CPU bus clock multiplier. Use these jumper settings shown below to
achieve the corresponding multiplier ratio.
Table 5-2 shows the multiplier needed for various processor speeds
with the system clock speed at 66 MHz and at 100 MHz.
To configure the Host Bus Clock/CPU Core Clock ratio
(multiplier)
Set the jumper according to the multiplier that you want
(see Table 5-3).
Table 5-3 shows all the multipliers that the motherboard supports.
Table 5-2: Settings for System Clock and Multiplier.
Pentium II/
Celeron
Processor
System
Clock
Multiplier
Pentium II
Processor
System
Clock
Multiplier
233 MHz 66 MHz 3.5x 350 MHz 100 MHz 3.5x
266 MHz 66 MHz 4x 400 MHz 100 MHz 4x
300 MHz 66 MHz 4.5x 450 MHz 100 MHz 4.5x
333 MHz 66 MHz 5x 500 MHz 100 MHz 5x
Table 5-3: Jumper Settings for Multiplier.
Multiplier
JP11, JP12, JP13, JP14
Jumpers
Multiplier
JP11, JP12, JP13, JP14
Jumpers
2.5x 4x