background image

C re a t i v e   E n d - U s e r   S o f t w a re   L i c e n s e   A g re e m e n t

V e r s i o n   2 . 0 ,   J u n e   1 9 9 8

PLEASE READ THIS DOCUMENT CAREFULLY BEFORE USING THE SOFTWARE. BY USING THE SOFTWARE, YOU AGREE TO 
BE BOUND BY THE TERMS OF THIS AGREEMENT. IF YOU DO NOT AGREE TO THE TERMS OF THE AGREEMENT, DO NOT 
OPEN THE SEALED DISK PACKAGE, INSTALL OR USE THE SOFTWARE. PROMPTLY RETURN, WITHIN 15 DAYS, THE 
SOFTWARE, ALL RELATED DOCUMENTATION AND ACCOMPANYING ITEMS TO THE PLACE OF ACQUISITION FOR A FULL 
REFUND.

This is a legal agreement between you and Creative Technology Ltd. 
and its subsidiaries (“Creative”). This Agreement states the terms and 
conditions upon which Creative offers to license the software sealed in 
the disk package together with all related documentation and 
accompanying items including, but not limited to, the executable 
programs, drivers, libraries and data files associated with such programs 
(collectively, the “Software”).

LICENSE
1. Grant of License

The Software is licensed, not sold, to you for use only under the terms 
of this Agreement. You own the disk or other media on which the 
Software is originally or subsequently recorded or fixed; but, as 
between you and Creative (and, to the extent applicable, its licensors), 
Creative retains all title to and ownership of the Software and reserves 
all rights not expressly granted to you.

2. For Use on a Single Computer

The Software may be used only on a single computer by a single user 
at any time. You may transfer the machine-readable portion of the 
Software from one computer to another computer, provided that (a) 
the Software (including any portion or copy thereof) is erased from 
the first computer and (b) there is no possibility that the Software will 
be used on more than one computer at a time.

3. Stand-Alone Basis

You may use the Software only on a stand-alone basis, such that the 
Software and the functions it provides are accessible only to persons 
who are physically present at the location of the computer on which 
the Software is loaded. You may not allow the Software or its 
functions to be accessed remotely, or transmit all or any portion of the 
Software through any network or communication line.

4. Copyright

The Software is owned by Creative and/or its licensees and is 
protected by United States copyright laws and international treaty 
provisions. You may not remove the copyright notice from any copy 
of the Software or any copy of the written materials, if any, 
accompanying the Software.

5. One Archival Copy

You may make one (1) archival copy of the machine-readable portion 
of the Software for backup purposes only in support of your use of the 
Software on a single computer, provided that you reproduce on the 
copy all copyright and other proprietary rights notices included on the 
originals of the Software.

6. No Merger or Integration

You may not merge any portion of the Software into, or integrate any 
portion of the Software with, any other program, except to the extent 
expressly permitted by the laws of the jurisdiction where you are 
located. Any portion of the Software merged into or integrated with 
another program, if any, will continue to be subject to the terms and 
conditions of this Agreement, and you must reproduce on the merged 
or integrated portion all copyright and other proprietary rights notices 
included in the originals of the Software.

7. Network Version

If you have purchased a “network” version of the Software, this 
Agreement applies to the installation of the Software on a single “file 
server”. It may not be copied onto multiple systems. Each “node” 
connected to the “file server” must also have its own license of a 
“node copy” of the Software, which becomes a license only for that 
specific “node”.

8. Transfer of License

You may transfer your license of the Software, provided that (a) you 
transfer all portions of the Software or copies thereof, (b) you do not 
retain any portion of the Software or any copy thereof, and (c) the 
transferee reads and agrees to be bound by the terms and conditions of 
this Agreement.

9. Limitations on Using, Copying, and Modifying the Software

Except to the extent expressly permitted by this Agreement or by the 
laws of the jurisdiction where you acquired the Software, you may not 
use, copy or modify the Software. Nor may you sub-license any of 
your rights under this Agreement.

10. Decompiling, Disassembling, or Reverse Engineering

You acknowledge that the Software contains trade secrets and other 
proprietary information of Creative and its licensors. Except to the 
extent expressly permitted by this Agreement or by the laws of the 
jurisdiction where you are located, you may not decompile, 
disassemble or otherwise reverse engineer the Software, or engage in 
any other activities to obtain underlying information that is not visible 
to the user in connection with normal use of the Software.

In particular, you agree not for any purpose to transmit the Software 
or display the Software's object code on any computer screen or to 
make any hardcopy memory dumps of the Software's object code. If 
you believe you require information related to the interoperability of 
the Software with other programs, you shall not decompile or 
disassemble the Software to obtain such information, and you agree to 
request such information from Creative at the address listed below. 
Upon receiving such a request, Creative shall determine whether you 
require such information for a legitimate purpose and, if so, Creative 
will provide such information to you within a reasonable time and on 
reasonable conditions.

In any event, you will notify Creative of any information derived from 
reverse engineering or such other activities, and the results thereof 
will constitute the confidential information of Creative that may be 
used only in connection with the Software.

TERMINATION
The license granted to you is effective until terminated. You may 
terminate it at any time by returning the Software (including any portions 
or copies thereof) to Creative. The license will also terminate 
automatically without any notice from Creative if you fail to comply with 
any term or condition of this Agreement. You agree upon such 
termination to return the Software (including any portions or copies 
thereof) to Creative. Upon termination, Creative may also enforce any 
rights provided by law. The provisions of this Agreement that protect the 
proprietary rights of Creative will continue in force after termination.

LIMITED WARRANTY
Creative warrants, as the sole warranty, that the disks on which the 
Software is furnished will be free of defects, as set forth in the Warranty 
Card or printed manual included with the Software. No distributor, dealer 
or any other entity or person is authorized to expand or alter this warranty 
or any other provisions of this Agreement. Any representation, other than 
the warranties set forth in this Agreement, will not bind Creative.

Creative does not warrant that the functions contained in the Software 
will meet your requirements or that the operation of the Software will be 
uninterrupted, error-free or free from malicious code. For purposes of this 
paragraph, “malicious code” means any program code designed to 
contaminate other computer programs or computer data, consume 
computer resources, modify, destroy, record, or transmit data, or in some 
other fashion usurp the normal operation of the computer, computer 
system, or computer network, including viruses, Trojan horses, droppers, 
worms, logic bombs, and the like. EXCEPT AS STATED ABOVE IN 
THIS AGREEMENT, THE SOFTWARE IS PROVIDED AS-IS 
WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR 
IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED 
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A 
PARTICULAR PURPOSE. CREATIVE IS NOT OBLIGATED TO 
PROVIDE ANY UPDATES, UPGRADES OR TECHNICAL 
SUPPORT FOR THE SOFTWARE.

Further, Creative shall not be liable for the accuracy of any information 
provided by Creative or third party technical support personnel, or any 
damages caused, either directly or indirectly, by acts taken or omissions 
made by you as a result of such technical support.

TEXT CONTINUED ON INSIDE BACK COVER OF MANUAL . . . .

Summary of Contents for Blaster PC M001




































































Reviews: