MODEL PSRAL
19864-300 Rev A (07-20)
© Copyright 2014, Creative Playthings
Page 11
ASSEMBLY INSTRUCTIONS
Back of
tower
Front of
tower
1/4 x 2" Hex Bolts in
top holes, 1/4 x 2" Lag
Screws in bottom holes.
1/4 x 2" Hex Bolts in
top holes, 1/4 x 2" Lag
Screws in bottom holes.
1/4 x 2-1/2"
Hex Bolts
STEP 5 — Raise the Tower:
Lift the top of the tower and walk it up until it stands vertical
on the base.
STEP 6 — Right Side of Tower:
Fasten one Sandbox Side (E) to the Front Right (K) and
Back Right (I) Posts as shown at right. Use 1/4 x 2" Hex Bolt
Assemblies in the top holes and 1/4" x 2" Lag Screws with
1/4" Flat Washers in the bottom holes.
Fasten the Platform Side Right (C) to the Back Right Post
and Front Right Post in the orientation shown using 1/4 x
2-1/2" Hex Bolt Assemblies. Note the hole positions along
the board.
Fasten the Side Arch (F) to the Front Right and Back Right
Posts as shown at right. Use 1/4 x 2" Hex Bolt Assemblies
in the top holes and 1/4" x 2" Lag Screws with 1/4" Flat
Washers in the bottom holes.
E
I
K
F
C
