Stagehand Mini
2
Manual
Page 19
Ethernet
Connection
To communicate with Spikemark and run cues in a show, the Stagehand needs to be connected to a network.
Located on the back side of the Stagehand, the Ethernet input will accept a CAT5 network cable with either a
traditional RJ45 plug or a RJ45 plug with a Neutrik Ethercon shell installed (Mouser Part #568‐NE8MC‐B). The
Ethercon shell is an XLR housing that slips over a network cable to provide additional strain relief and a positive‐
lock connection that makes it preferred backstage.
Figure 16
Control
Signal
Output
Figure 17
