Stagehand Mini
2
Manual
Page 13
Figure 9
Before you can move any machine, you must connect the Stagehand to a Showstopper with a 5‐pin XLR cable.
The 5‐pin XLR cable is not a DMX signal, but rather it was chosen as a convenient cable that is prevalent in many
venues so you should always be able to find a spare cable when needed.
Below is the pin‐out for the Showstopper Emergency Stop input:
Figure 10
Encoders
and
Limits
Connections
Two sets of encoder signals (one for speed monitoring and one for positioning) and three sets of limit switches
(forward, reverse, and ultimate) are combined in one rectangular connector (Harting connector: #09160243101,
Harting plug: #09160243001 ).
