Creative Conners Stagehand Mini2, Manual

Page: 4 / 33

Stagehand Mini 2 Manual
Page 4
Getting Started
The Stagehand Mini
2
is the most versatile controller in our Stagehand family. The Mini
2
is built to control a
wide variety of machines from small DC motors, to large brushless servo motors, to hydraulic proportional
valves. Unlike our other Stagehands, the Mini2 does not include any built‐in amplifier to power a machine
directly, but rather it outputs a standardized control signal that can be used with many third‐party amplifiers.
The Mini
2
packs two independent motion controllers in a single, convenient, 3U rack mount enclosure. This
double‐headed approach allows you to control two machines from a single Stagehand, which is another
unique feature of the Mini
2
that makes this controller a great choice for many shows.
This manual will guide you through:

Unpacking

Installation

Powering up

Operation

Troubleshooting
If you need help along the way contact us on our website ( creativeconners.com ), via email
(support@creativeconners.com), or by phone (401‐289‐2942)
What’s in the box?
Inside the box you should find:

Reference manual (this document)

Stagehand Mini
2
motion controller

Two (2) control cords for connecting the Mini
2
to your amplifier

Locking IEC power cable

Two (2) D‐Sub 15‐pin shorting plugs to disable Brake Fault and Drive Fault inputs
If any of these items are missing, please contact us immediately for a replacement.
If you purchased any power cables, encoders, limit switches, or other accessories, those items are packaged
separately.