![background image](http://html1.mh-extra.com/html/crary/john-deere-200/john-deere-200_owners-manual_2679354061.webp)
John Deere Air Reel Owner’s Manual
59
OPERATION
5.4 cONTROLS
Before starting to work, all operators should familiarize
themselves with the location and function of the controls
and safety devices. Some machines may vary due to dif-
ferent models of combines and headers.
MANiFOLD TiLT:
Moving the toggle switch to the FORE position (Figures
75 & 76) extends the shaft of the electric actuator. This
rotates the manifold, directing the air tubes towards
the back of the header. See Section 5.5 for the cen-
ter stroke position which points the air tubes directly
behind the cutterbar.
Moving the toggle switch to the AFT position retracts
the shaft of the electric actuator. This rotates the
manifold, directing the air tubes towards the front of
the header.
1.
2.
FAN AiR vOLUME AcTUATOR:
Move the toggle to the OPEN position (Figure 77) to
open the butterfly plate which increases air volume to
the air tubes.
Move the toggle to the CLOSED position to close the
butterfly plate which decreases air volume to the air
tubes.
REEL LiFT:
Consult your owner/operator’s manual that came with
your header.
HYDRAULic REEL FORE AND AFT ADJUSTMENT:
Consult your owner/operator’s manual that came with
your header.
MANUAL REEL FORE & AFT ADJUSTMENT:
Consult your owner/operator’s manual that came with
your header.
1.
2.
Figure 77, Fan butterfly actuator
Figure 76, Manifold tilt/air movement
Figure 75, Manifold tilt & fan air volume toggle switch