![background image](http://html1.mh-extra.com/html/crary/john-deere-200/john-deere-200_owners-manual_2679354053.webp)
John Deere Air Reel Owner’s Manual
51
ASSEMBLY
4.26 ELEcTRicAL WiRiNG
Mount the switch plate assembly in a convenient place
inside the cab (use either velcro or bolts).
Run the red wires (with fuse-15 Amp & 6 Amp) to a
power source (Use actuator switch harness if provided
and combine is equipped with same type of auxiliary
power supply).
1.
2.
Figure 68, Switch plate assembly
WARNiNG
Place all controls in neutral or off, stop combine engine,
set parking brake, remove ignition key, set cylinder
stops, wait for all moving parts to stop, then properly
block machine before servicing, adjusting, repairing or
unplugging.
Run the black wires to a suitable ground or to the
actuator switch harness ground wires.
Route the long harnesses along the combine and
header to the actuators (15
Amp Manifold Tilt; 6 Amp
Air Volume) and plug in (Figure 68).
Mount the intermediate harness connectors to a con-
venient location on the combine feeder house.
3.
4.
5.