![background image](http://html1.mh-extra.com/html/crary/john-deere-200/john-deere-200_owners-manual_2679354045.webp)
John Deere Air Reel Owner’s Manual
43
ASSEMBLY
Insert the reel support pad underneath the top of each
reel support bracket.
Slide the RH and LH reel support brackets onto their
respective reel arms (Figure 60 & 61).
Attach the rod end of the hydraulic cylinders to the
reel support bracket yokes. Use a 3/8” x 2” bolt and
locknut per bracket.
Check clearance of the reel support assembly to
header reel arm components.
Install the stop bolt at the front of each reel arm.
1.
2.
3.
4.
5.
Figure 61, LH reel support installation
Figure 60, RH reel support installation
WARNiNG
Avoid crushing injury or death from fall of raised reel.
Before working on or under a raised reel, place all con-
trols in neutral or off, stop combine engine, set parking
brake, remove ignition key, wait for all moving parts to
stop and set cylinder stops on both sides of reel before
servicing, adjusting, repairing, or unplugging.
4.20 REEL SUPPORT iNSTALLATiON (HYD. FORE AND AFT) (200, 900, 900F SERiES)