Title part xxx
Subtitle part xxx
26
craftsman marine diesel engines CM4.33 / cm4.42
Changing of the engine lubrication oil
Remove the dipstick first. Then insert the hose of the
special sump pump into the pipe of the dipstick. Extract
the oil from the engine by quickly pushing down the grip
of the sump pump and then pull it slowly upwards.
Fitting the oil filter
When all lubricating oil has been drained, replace the oil
filter. A little more oil may then come out of the engine.
Collect this oil in a beaker or bowl and bring it, with the
rest of the used oil, to the service station, all in accor-
dance with the environmental directives.
Replacing the oil must take place when
the engine has its operating temperature
(but is stopped, of course), so that the
fluid can be pumped out easily. The oil
temperature is then about 80 degrees
Celsius, so watch out for burning the
skin !
Replace the engine lubricant and the oil filter after every
100 hours of service or at least once a year.
Preparation of the new oil filter
Clean the surface of the rubber ring in the rim of the oil
filter and grease it with fresh engine lubrication oil.
Engine lubrication oil
11 Maintenance and inspection
Summary of Contents for CM4.33
