Crafco SUPER SHOT 125, Parts Manual

Page: 60 / 230

Super Shot 125 Diesel Melter Part Manual
Chapter 6 Maintenance Instructions
©2017 by Crafco, Inc. All Rights Reserved………………..………………………………..….…Maintenance Instructions 6-12
Wand Handle Replacement 6.20.4
1. Follow steps 1-6 from 6.20.1 above.
2. Remove actuator, actuator lock, pin, and spring.
3. Remove (2) #4-40 x 1/2” pan head screws from switch, then remove switch from handle.
4. Remove (2) #10-32 x 5/8” round head machine screw from terminal block then remove
terminal block from handle.
5. Flip wand over and remove the remaining (2) 1/4-20 x 1/2” screws from the handle.
Remove handle from wand tube.
6. Install new handle by reversing previous steps.
Fig.6-4 Switch Wire Location
Fig.6-5 Wire Routing