Crafco SUPER SHOT 125, Parts Manual

Page: 43 / 230

Super Shot 125 Diesel Melter Part Manual
Chapter 5 Operating Instructions
©2017 by Crafco, Inc. All Rights Reserved………………..…………………………………..….Operating Instructions 5-15
5.13 Storing the Electric Hose for Transport
Step Action
1 Leave the hose in the boom, swing the boom clockwise towards the front of the
machine and lock the boom into position with the latch provided.
2 Place the wand in the wand holder and lock the wand into position with the latch
provided.
3 Place the hose in the hose guide and secure with the Velcro strap.
CAUTION
Hose damage occurs if:
The hose is bent or moved when cold.
The hose is twisted or bent at a sharp radius.
The hose is moved before being heated a minimum of 30 minutes and set at 380°F.
The operator crosses over or under the hose causing the wires between the hose and
wand connection to twist or wrap up.
The swivel is cold and is not flexible which can cause the hose to twist.
The wiring between the hose and the wand is pulled, stressed, or used to support the
wand.
Table 5-12 Hose for Transport Instructions