CRADLEPOINT
COR | USER MANUAL Firmware ver. 5.0.0
© 2013
CRADLEPOINT, INC. PLEASE VISIT
HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/
FOR MORE HELP AND RESOURCES
PAGE 167
7.9 VPN Tunnels
VPN (virtual private network) tunnels are
used to establish a secure connection to a
remote network over a public network. For
example, VPN tunnels can be used across
the Internet by an individual to connect to
an office network while traveling or by two
office networks to function as one network.
The two networks set up a secure
connection across the (normally) unsecure
Internet by assigning VPN encryption protocols.
The IBR600/IBR650 uses IPsec (Internet Protocol security) to authenticate and encrypt packets exchanged across the
tunnel. To set up a VPN tunnel with the IBR600/IBR650 on one end, there must be another device (usually a router) that
also supports IPsec on the other end.
IKE (Internet Key Exchange) is the security protocol in IPsec. IKE has two phases, Phase 1 and Phase 2. The
IBR600/IBR650 has several different security protocol options for each phase, but the default selections will be sufficient
for most users.
The VPN tunnel status page allows you to view the state of the VPN tunnels. If a tunnel fails to connect to the remote site,
check the System Logs for more information. You may double click on a cell to directly edit that information.
Click
Add
to configure a new VPN tunnel.
Summary of Contents for COR IBR600
Page 1: ......
