manualshive.com logo in svg

Cradlepoint COR IBR600, Product Manual

The Cradlepoint COR IBR600 is a versatile and reliable networking solution that keeps you connected on the go. Need help setting it up? Look no further! Download your free Product Manual, packed with instructions and troubleshooting tips, exclusively from our website.

Share
Download
background image

CRADLEPOINT 

COR | USER MANUAL Firmware ver. 5.0.0 

© 2013 

CRADLEPOINT, INC.                                        PLEASE VISIT 

HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/

 FOR MORE HELP AND RESOURCES 

 

 

 

  PAGE 33  

 

4.6  IP Passthrough Setup 

You can quickly enable IP Passthrough with the IP Passthrough Setup Wizard available under 

Getting Started 

→

 IP 

Passthrough Setup

. IP Passthrough takes a 3G/4G WAN data source and passes the IP address through to Ethernet 

LAN.  
Using this function requires many changes to your router configuration. The IP Passthrough Setup Wizard will 
automatically make these changes for you: simply read through the wizard and select 

Enable IP Passthrough

 on the 

second page. For further configuration options, see 

Network Settings 

→

 WiFi / Local Networks

. 

Review the list of changes to ensure they are compatible with your router needs:  

•

  All Ethernet ports will be set to LAN (i.e., you cannot use Ethernet as an Internet source for your router). 

•

  All WAN devices will have Load Balance disabled and the highest priority device will be used. 

•

  All network groups except the primary network group will be removed. 

•

  All wireless interfaces will be removed from the primary network group. (It is possible to have a wireless interface 

associated with another network.) 

•

  All router-based VPN and GRE services will be disabled.  

•

  The Routing Mode will be set to IP Passthrough.  

•

  The Subnet Selection Mode will be set to "Automatically Create Subnet" 

 
Any Ethernet WAN connections should be disconnected before IP Passthrough is enabled. 
 
 

Summary of Contents for COR IBR600


























































































































































































































































Reviews:

No comments

Related manuals for COR IBR600

Hard Head 791221 Operating Instructions Manual preview
791221
Brand: Hard Head Pages: 40
Harbor Freight Tools 3394 Assembly And Operating Instructions Manual preview
3394
Brand: Harbor Freight Tools Pages: 7
Racing PY Series Installation Manual Book preview
PY Series
Brand: Racing Pages: 13
Tamron A056 Owner'S Manual preview
A056
Brand: Tamron Pages: 3
X4-Life Sleek Instruction Manual preview
Sleek
Brand: X4-Life Pages: 2
4 tec SENSORTECHNOLOGY DOMINO 1050 Fitting And Operating Instructions preview
DOMINO 1050
Brand: 4 tec SENSORTECHNOLOGY Pages: 5
Kia 2016 Cadenza Owner'S Manual preview
2016 Cadenza
Brand: Kia Pages: 419
hepco & becker 410999 00 01 Quick Start Manual preview
410999 00 01
Brand: hepco & becker Pages: 2
Orion STARSHOOT 52173 Instruction Manual preview
STARSHOOT 52173
Brand: Orion Pages: 8
Rockwell Automation Allen-Bradley 42GLP-9000-QD Original Instructions Manual preview
Allen-Bradley 42GLP-9000-QD
Brand: Rockwell Automation Pages: 10
Vaxcel T0277 Assembly And Installation Instructions preview
T0277
Brand: Vaxcel Pages: 5
Mechatron ATC Series Operating Manual preview
ATC Series
Brand: Mechatron Pages: 60
Easydive Leo3 Smart Manual preview
Leo3 Smart
Brand: Easydive Pages: 6
hepco & becker 6504519 01 02 Quick Start Manual preview
6504519 01 02
Brand: hepco & becker Pages: 2
Kindermann 7448 000 01 Installation And Operating Manual preview
7448 000 01
Brand: Kindermann Pages: 15
Harman Kardon DP 2US Quick Start Manual preview
DP 2US
Brand: Harman Kardon Pages: 16
TATA Motors TIAGO XZ 2019 Owner'S Manual preview
TIAGO XZ 2019
Brand: TATA Motors Pages: 184
Campbell 0871LH1 Instruction Manual preview
0871LH1
Brand: Campbell Pages: 27

Brands by name

Popular brands

Load more brands