CRADLEPOINT
COR | USER MANUAL Firmware ver. 5.0.0
© 2013
CRADLEPOINT, INC. PLEASE VISIT
HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/
FOR MORE HELP AND RESOURCES
PAGE 23
You may have changed the administrator password during initial setup using the First Time Setup Wizard. Log in using
your personalized administrator password.
If you have forgotten your personalized password, you can reset the router to factory defaults. When you reset the router,
the administrator password will revert back to the
Default Password
. Press and hold the
reset button
on the router unit
until the lights flash (Approximately 10-15 seconds). You can then log in using the
Default Password
(found on the
bottom of your router).
4.1.1
Router Details
The Administrator Login page includes a quick-reference section that shows the following information:
Router Details
•
Model Number:
IBR600/IBR650
•
Internet Connection:
Connected/Disconnected
Wireless Details (IBR600)
•
Status:
Enabled/Disabled
•
Clients:
The number of attached users.
•
Channel:
The channel number.
•
Name:
The name of the primary network. If you have more than one wireless network enabled, the additional
network names will also be listed here.
Modem Details
•
Manufacturer:
The name of the modem manufacturer (CradlePoint).
•
Model:
The name of the modem model (Internal LTE, for example).
•
Signal:
The strength of the signal (dBm).
•
Mode:
(LTE, EVDO, HSPA, etc.)
Summary of Contents for COR IBR600
Page 1: ......
