CRADLEPOINT
COR | USER MANUAL Firmware ver. 5.0.0
© 2013
CRADLEPOINT, INC. PLEASE VISIT
HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/
FOR MORE HELP AND RESOURCES
PAGE 94
6.8.2
Local Network Editor
Click
Add
or select a network and click
Edit
to open the
Local Network Editor
to make configure a LAN. The
Local
Network Editor
contains the following tabs: General Settings, IPv4 Settings, IPv6 Settings, Interfaces, Access Control,
IPv4 DHCP, IPv6 Addressing, Multicast Proxy, Schedule, VRRP, STP, and Wired 802.1X.
General Settings:
Enabled:
Push to manually disable a network. Also,
some settings could cause a network to be
automatically disabled: click here to re-enable the
network.
Name:
This primarily helps to identify this network
during other administration tasks.
Hostname:
[Default: cp (for CradlePoint)] The
hostname is the DNS name associated with the
router's local area network IP address.
NOTE: You can access the router’s administration pages by
typing the hostname into your browser, so if you change “cp” to
another hostname, you can access the administration pages
through the new hostname.
Summary of Contents for COR IBR600
Page 1: ......