Maintenance
68 / 79
4.
Place the new cooling fans on the fan tray, and fasten the cable on the
fan tray with cable ties. Tools required: No.2 Phillips head screwdriver,
torque value: 14~18kgf.cm
5.
Reinstall the assembled fans onto the inverter. Tools required: No.2
Phillips head screwdriver, torque value: 16kgf.cm.
Replace the Inverter
IMPORTANT!
Make sure the AC breaker and DC switch of inverter are turned off.
Replace the inverter in reverse order relative to the installation steps in section
3.4 Install the Inverter:
1.
Use a #3 Philips head screwdriver to remove the two M6X90 screws.
2.
Remove the inverter from its mounting bracket with the coordination of
3 people.
3.
Replace the new inverter on the mounting bracket and fasten it.
