CLEANING INSTRUCTIONS TO BE DONE DAILY
1
. In order to clean the glass polisher, turn the unit off and unplug it.
4.
Place the brushes evenly on the flat rack or dish rack of your dishwasher (either by laying down or
standing them up) -- being sure that they are NOT overlapping.
5
. Run them through the regular wash cycle in your on premise, high temperature dishwasher.
6.
When the regular wash cycle on your dishwasher is complete, place the brushes back onto the
colored spindles.
7.
Replace the brushes on their color coded supports
(red, green and yellow). Turn the brush in a clockwise
direction to lock in place. Be sure that the brushes are
correctly inserted onto the spindles.
8.
After all brushes have been placed on the
supports, plug in machine and turn power on. Run
for approximately 15 to 30 minutes or until dry.
2
. Remove the brushes from the support
by rotating the brush in a counter
clockwise direction and gently pulling the
brush upwards.
3.
Remove the brush completely
by slipping it off its support
9.
Turn power Off.
10
. Replace dust cover.
Dust Cover
Power ‘On/Off’
QUICK START OPERATING
PROCEDURES FOR “STEMSHINE” -
THE GLASS POLISHER
www.cpishine.com
T: 866-912-3469
2
Summary of Contents for GP8
Page 19: ...Update 07 10 09 Page 20 ...
Page 20: ...Update 07 10 09 Page 21 ...