![background image](http://html.mh-extra.com/html/cpi/gp8/gp8_operating-instructions-manual_2675037016.webp)
Page - 17
SALES + SERVICE
CPIGP8AOPINST
(866) 912-3469
WWW.CPISHINE.COM
REPLACE A FULL SET OF BRUSHES
:
Ensure you have an 8 brush set – colour coded with 3 red; 2 green and 3 yellow
Place each brush on top of support (B) (matching the colours) and slide the brush down the support.
Ensure that slot (A) is connected by slightly rotating the brush in a clockwise direction. If the brush is
not properly fixed on the support, it will not rotate once the machine is switched on.
REPLACE THE GREEN BRUSH TIP:
Firmly grasp both ends of the
colour coded green brush
Twist until the brush separates into
two parts. Discard the worn brush
tip.
Fit the new tip into the brush and
twist until
hand tight
. The brush is
now ready to be put back onto its
support.
REPLACE THE RED OR YELLOW BRUSH TIP
:
Using ‘needle-nose pliers’, grasp the lip of the brush tip and turn to the
left to loosen. This will require 2-3 turns using the pliers.
Continue turning the tip by hand
until the brush is separated into
two parts. Discard the worn
brush tip
.
Summary of Contents for GP8
Page 19: ...Update 07 10 09 Page 20 ...
Page 20: ...Update 07 10 09 Page 21 ...