stretch belt installation tool -
ford/volvo
model no:
vs790
thank you for purchasing a sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. safety
WarninG!
Wear approved eye protection. Wear appropriate Personal Protective equipment. A full range of Personal Protective
equipment is available from your Sealey stockist.
WarninG!
ensure that Health & Safety, local Authority Regulations and general workshop practice Regulations are adhered to when
using tools.
8
do not
use tools if damaged.
9
maintain tools to ensure that they are in an adequate condition for safe use and optimum performance.
9
ensure that a vehicle that has been raised by a jack is adequately supported. Use axle stands.
8
do not
attempt to start or move a vehicle whilst in gear and with timing devices fitted.
9
Wear suitable clothing to avoid snagging.
do not
wear jewellery. Tie back long hair.
9
Account for all tools, parts and components being used.
do not
leave these in or near the engine. Return tools to suitable storage
after use.
9
When not in use, store in a safe, dry childproof place.
9
Keep children and unauthorised persons away from the work area.
▲
iMPortant
!
these instructions are intended as a guide only. always refer to the vehicle manufacturer’s service instructions
or a proprietary manual to establish the correct procedure and data.
WarninG!
The warnings, conditions and instructions in this manual cannot cover all possible conditions and situations. The Operator/
User must apply caution and common sense (good practical sense).
2. introduction
S
tretch belt fitting kit for Ford and Volvo. Designed for use where universal tools won’t work due to the wider crankshaft pulley which restricts
access. Time saving tool, simple to use, one part of the kit clips over the crankshaft pulley to guide the belt, the other part fits over the water
pump pulley and with a 17mm socket it’s simply rotated until the belt is in located correctly on all the pulleys. Suitable for Ford 1.4, 1.6 (Focus,
C-Max, Mondeo) and Volvo 1.6 (S40, C30, V50) petrol engines.
3. contents
Refer to
Instructions
Wear eye
Protection
Wear Protective
Clothing
VS790 Issue:1 02/05/19
Original Language Version
© Jack Sealey limited
item no. Part no.
description
1
VS790.01
Installation tool
2
VS790.02
Guide tool
