28
Backup/Restore
This menu Item allows the operator/technician to backup current Configurations for recovery later if needed. It also allows
the board to be restored to factory defaults, restore machine to previously saved configuration. Backup files are saved
with the date created and are stored on the controller not a removable memory device.
Clone Configurations / Clone Board
This menu allows you to copy a machine that has previously been set up and save that
file on a flash drive.
The difference between Clone Configurations and Clone Board menu is that clone
board also copies the meter readings, this allow you to change a board or update
software and keep the same meter readings. Once you have copied an existing
configuration (set up) you can load it into other machines. For ease of use in the
future, the files can be named.
You can have unlimited clone files in the atlas folder.
Before attempting to clone an existing machine configuration you must create a folder
on your USB flash drive named atlas (lower case is important).
Insert the flash drive into an available USB port on the control board, typically USB3
Enter PIN 3333
Touch System Settings, then Clone configuration or Clone Board.
Summary of Contents for 471D-HC
Page 1: ...403542 Rev 0 0 ...
Page 53: ...52 ...
