16
Show Currency Symbol
Select the menu item for Show Currency Symbol to turn it on or off. When turned on the currency symbol will display
when applicable.
Decimal Separator
Select this menu item to change the decimal point that is displayed to a comma.
Correct Change Parms
Select this menu item to gain access to set the payback parameters in the machine.
Force Vend
Declining Balance
Accept on Low Change
Credit for Failed Vend
Allow Customer Overpay
Force Vend
Touch Force Vend to Toggle Between Yes and No.
When Force Vend is set to No: All money inserted can be paid back by pressing
cancel to end the transaction.
When Force Vend is set to Yes, a consumer will not be able to receive their
credit back when:
The established credit meets or exceeds the minimum price of the selections
in the machine.
Any bills are stacked in establishing credit.
Any non-tube coins are inserted in establishing credit
A “No Change Without Purchase” message will be displayed when a consumer
attempts to return credit.
Declining Balance
Touch Declining Balance to toggle between Off and On.
If Declining Balance is set to Off at the end of vend any change due back to the
customer will be paid back immediately.
If Declining Balance is set to On the change due back after a vend occurs, will remain on the display allowing the customer
to add more money to make an additional purchase. Note: If set to Yes, customer may touch Cancel to return remaining
credit.
Accept on Low Change
Used to set acceptance of a bill depending on how much change is available in the coin mechanism.
If set to default $0.00, the machine will only accept a bill when the coin mechanism has enough change to pay back full
credit. If a value is set to anything other than $0.00 bills will be accepted to the set value even though change may not be
available (the customer may get shortchanged).
When selected, a new screen with a keypad will be displayed. Use this keypad to set the value of money you wish to
accept when no change is available. Setting this to anything other than $0.00 may cause the customer to be shortchanged.
After entering the value, press Accept to save it.
Summary of Contents for 471D-HC
Page 1: ...403542 Rev 0 0 ...
Page 53: ...52 ...