10
Edit the Planogram
Select Edit Planogram to make changes to the
Planogram Menu
Choose the tray you wish to Edit
Choose the selection you wish to Edit.
Select Product to enter a new UPC code
If you choose Select from the Product List all
products will be listed and you can scroll
through to choose a product. If you choose
Edit Current Code, a numeric box will appear
allowing you to enter a new UPC code. This
code must be in the current Planogram or
Library. You must choose Save to lock in the
changes
Selecting the Home Un-homed icon will home any motors that are not in the
home position. Typically, this would be pushed before servicing the machine
because any motors that are not at home will most likely drop a product when
rotating to the home position. Most of the time when a motor is not at
home, it is because there was an issue with a product dropping and the SureVend feature was activated because a product
did not drop; therefore, the spiral was advanced until the product dropped. If motors are not homed when servicing the
machine and a motor is not in the home position, the next time that selection is attempted the spiral will stop in the home
position if a product drops essentially correcting itself.
Summary of Contents for 471D-HC
Page 1: ...403542 Rev 0 0 ...
Page 53: ...52 ...