17
Low Change Message
Used to set the lowest amount registered in the coin mechanism before the display shows “USE EXACT CHANGE”
Select Low Change Message to enter lowest value on corresponding line (default setting of $1.00 recommended).
Touch Accept to save the setting.
Touch Back to exit this menu mode.
Credit for Failed Vend
Press Credit for Failed Vend on the keypad to change between the two settings:
Return = In the event of a failed vend, the credit will be returned automatically.
Hold = In the event of a failed vend, the credit will remain on the machine allowing you to purchase another item or
pressing Cancel to return the credit shown.
Allow Consumer Overpay
Select this menu item to toggle Customer Overpay between Off and On.
When Consumer Overpay set to off, the machine will not accept any currency for which it cannot make change, regardless
of Low Change Message Setting or Accept on Low Change Setting.
When Consumer Overpay set to on, based on other settings in the machine the customer would be allowed to make a
purchase even if change is not available. This could result in a potential situation where the consumer gets short changed.
Discount Price
This menu shows your current discount for cash. This only applies to onboard cashless transactions. The Cash Discount
cannot be changed at the machine. The Cash Discount currently can only be set to 10 cents. For Crane cashless, cash
discounts can be changed by device in your portal.
When enabled, Cash Discount applies to all products in the machine. No discount is applied if any part of the transaction
is cashless, even in a mixed tender transaction. Both Cash and Credit prices are shown at bottom of the shopping cart
screen. The prices set in the machine and shown in the consumer and service mode screens are the cash sales prices. In
other words, the cash discount has already been applied.
Summary of Contents for 471D-HC
Page 1: ...403542 Rev 0 0 ...
Page 53: ...52 ...
