4096-224
CPI SATCOM & Antenna Technologies
1.8M SERIES 1184
18
STEP 3:
A). Attach feed support to the bottom of
the reflector with ( items 3, 6, 7 ) and
(2) of ( item 5 ). See Detail C.
B). Connect the feed rods to the end of
the feed support with (items 4, 6, 7)
and (2) of ( item 5 ). See detail D
C). Tighten the 1 / 2” carriage bolts to
the reflector crossarms using the
required torque specs on page 6.
D). Tighten all feed assembly hardware
using the required torque specs
on page 6.
See
Detail
D
Feed Rod
Feed Support
Tube
See
Detail C
Reflector ( FACING
)
Left Hand
Feed Rod
Right Hand
Feed Rod
FIGURE 2
Bottom of Reflector
Equal
Distance
Reflector
Support
Tube
FIGURE 3
