4096-224
CPI SATCOM & Antenna Technologies
1.8M SERIES 1184
14
STEP 12:
STEP 13:
A). Remove (2) #10 screws and washers
from positioner assembly tab.
B). Attach elevation pointer (item 7) to tab
as shown with # 10 hardware.
C). Tighten only until lockwashers are
flattened.
[ 7 ]
# 10
Hardware
Positioner Assembly
Tab
A). Attach reflector cross arms to the
reflector support tube with 1 / 2”
hardware ( items: 8,9,10,11). Do
not tighten.
Note the orientation of reflector
mounting holes, the inner most
holes on the cross arm flanges
will be to the top and the bottom
of the reflector.
Cross Arm
[ 8 ] 4 places
Reflector Support Tube
Cross
Arm
[ 9, 10, 11 ]
4 places
