4096-224
CPI SATCOM & Antenna Technologies
1.8M SERIES 1184
10
CAUTION: During the assembly procedure, the sequence of instructions must be
followed. DO NOT TIGHTEN ANY HARDWARE UNTIL INSTRUCTED
.
2.0
Assembly Overview
STEP 1:
STEP 2:
A). Remove azimuth rod from positioner
assembly.
B). Set azimuth rod and related hardware
aside.
Existing Hardware
Azimuth Rod
Positioner Assembly
A). Loosen rotation bolt on top of
positioner.
B). Rotate the positioner so that the
canister plate is oriented as shown.
C). Lightly tighten rotation bolt.
90
Rotation
Bolt
Canister
Plate
Positioner
