4096-224
CPI SATCOM & Antenna Technologies
1.8M SERIES 1184
17
CAUTION:
During the assembly procedure, the sequence of instructions must
be followed
.
Do Not Tighten Any Hardware Until Instructed.
Refer
to the feed support parts list and the steps shown below
.
STEP 1:
STEP 2:
A). Attach right and left feed rods to
the reflector with (items 3, 6, 7 )
and with (2) of ( item 5 ). See
Figure 2 and Detail A.
Feed Rods
See
Detail A
A). Before attaching the feed support,
sight the bottom of the reflector with
the reflector support tube, to be sure
the reflector is centered. If not, move
the reflector left or right along the
crossarms. See Figure 3.
B). Loosely mount the bottom of the feed
support to the reflector support tube
with (2) of ( items 8, 5, 6, 7 ).
See Detail B.
Feed Support Tube
See
Detail B
