MAINTENANCE MANUAL
YUI
pag. 3 di 16
Ver 01
–
2021-07-09
SUMMARY
INSTALLATION LOCATION: HOW TO CHOOSE
EXTERNAL INSTALLATION
INSTALLATION SITE: HOW TO PREPARE
ABOVE GROUND INSTALLATION (WITH LATERAL PANELS)
RECESSED INSTALLATION
8
CLEANING AND MAINTENANCE FILTER CARTRIDGES *
INTRODUCTION
•
The efficiency and safety of the YUI hot tub are guaranteed only by proper installation in
compliance with the regulations in force in the place of use. The following installation guide
provides the information necessary for a correct preparation of the rooms and of the water and
electrical connection systems. The phases involve the following figures:
•
a construction engineer to calculate the capacities of the platforms or floors;
•
a qualified company registered in the register that prepares the installation site according to
the indications provided by this guide, following the workplace safety regulations in force;
•
by a qualified and qualified electrician and plumber who prepare the electrical and plumbing
systems in compliance with local and national regulations relating to civil and industrial systems;
The user must promptly notify the company of any existing underground obstacles
such as gas, water and electrical or telephone cables.
All these specialists, at the end of the pre-installation must issue the declaration of conformity of
the systems performed. In the absence of this document, the Manufacturer declines any
responsibility for damage caused to the systems or premises where the hot tub will be installed.
N.B .: check with the competent municipal offices if there are any restrictions that prevent
installation or if there are permits to be requested.
WARNING
Incorrect installation could cause structural damage to the hot tub, voiding the warranty.