MAINTENANCE MANUAL
YUI
pag. 16 di 16
Ver 01
–
2021-07-09
WINTERING OPERATIONS
1.
Disconnect the tub from the main power supply
2.
Remove the water from the tub using the special drainage ports located on the
sides of the tub
3.
Remove the skimmer cartridges and wash them under running water following the
instructions given above.
4.
Clean the tub basin by washing with neutral soap, concluding with an adequate
rinsing.
5.
Attention: the use of non-slip and clean footwear is recommended
6.
Remove the covering panel placed at the height of the management keypad, by
undoing the screws fixing it to the structure. Then, taking care to place the rags
under the fitting, loosen the union connecting the primary circulation pipe to the
heater. The heater is located under the control panel. Loosening the unions will
allow any water left in the pipes to flow out.
7.
Dry the tub and basin
8.
Cover the tub with its own thermal cover: if the tub is located in an unprotected
area and therefore subject to bad weather, it is also suggested to protect the tub
with an outdoor cloth, positioned over the thermal cover. It is recommended to
periodically clear the snow from the roof, as well as from the sides of the pool, to
avoid premature deterioration of the wooden coating due to contact with it..
WARRANTY CONDITIONS
The warranty period for the SPA tub for private use is 2 years for the methacrylate
and glass resin body and 2 years for electromechanical and electrical components.
Furthermore:
•
The warranty is valid from the date of delivery of the product in question hereby.
•
The warranty covers defects in the raw material used in the construction of the tub.
•
The warranty covers any manufacturing defects or malfunctions of the
electromechanical and electrical components..
•
The warranty does not cover operating defects caused by improper installation, an improper
environment, fire, flooding, freezing and intentional damage.
•
The warranty does not cover damage resulting from improper use.
•
The warranty does not cover damage resulting from improper and / or failed
installation
•
as a qualified technician.
•
The guarantee does not cover the tub components and the operating levers if the
damage derives from improper or incorrect use of the aforementioned accessories
This warranty becomes invalid if the tub is not subjected to regular and periodic maintenance.
NOTE
*
Failure to comply with the above will result in the systematic forfeiture of the conditions of the guarantee.
CPA srl excludes any liability for failure to comply with the safety standards in force for the individual technical sectors affected by this document.
The information contained in this manual may vary at the discretion of the editor, without notice, together with the changes to the product in
question in this document: it will be the responsibility of the customer to verify the persistent correspondence of the product to the information sheet
when placing the order.