MAINTENANCE MANUAL
YUI
pag. 15 di 16
Ver 01
–
2021-07-09
WARNING
•
Do not clean the tub with rough tools, chemical solvents or grainy cleaners.
•
Avoid letting the bathtub come into contact with lighted cigarettes or heat sources.
•
It is necessary to drain the water from the tub if this is not used for more than 3
consecutive days (no power supply).
•
When using the whirlpool, avoid adding foaming materials.
•
Avoid using cosmetics.
•
Check the performance of the differential switch regularly and at least
•
once every 2 months.
•
Periodically check that the main power line, switches and connectors are not damaged.
•
Periodically check the water delivery and discharge pipes, check that the
unloading takes place without problems.
•
Be careful when moving the product: avoid excessive pressure, mechanical kickback or intense
vibrations.
•
Drain the water from the SPA when it is not in use for a long period of time, keep the installation
environment dry and ventilated.
COVER INSTRUCTION (option)
Always cover the tub with the thermal cover to minimize the heat loss of the water between one use and
another, but never during its use. Make sure that the cover is correctly positioned and that the soft flaps
are well laid out on the sides, so as to maximize insulation.
It is recommended not to lay the cover on the ground while it is not in use, in order
to preserve its cleanliness, especially for the part that is directly in contact with the
water of the tub. The cover should have its own storage place where it is not likely to
be damaged and where it cannot cause dangers
WARNING
Always remove the cover from the tub during use; failure to comply with this
standard can expose users to serious health risks.