![background image](http://html1.mh-extra.com/html/covidien/nellcor-oximax-n-560/nellcor-oximax-n-560_service-manual_2673876028.webp)
Performance Verification
18
6. The N-560 should stabilize on the subject's physiological signal in about
15 to 30 seconds. Verify that the oxygen saturation and pulse rate values
are reasonable for the subject.
Alarm Volume Control
1. Press and hold the
Alarm Silence
button for more than three seconds.
Verify the following:
• “Alarm Silence Duration Time” is displayed for approximately three
seconds.
• After three seconds:
• a steady tone is heard at the default volume setting
• the %SpO2 display indicates “VOL”
• the
Pulse Rate
display indicates the default setting of “4”
2. Press the
Adjust Down
button, while holding the
Alarm Silence
button, until an alarm volume setting of “1” is displayed. Verify that the
alarm volume has decreased but is still audible.
3. Press the
Adjust Up
button, while holding the
Alarm Silence
button, to
increase the alarm volume setting to a maximum value of “10.” Verify
that the volume increases.
4. Press the
Adjust Down
button, while holding the
Alarm Silence
button, until a comfortable audio level is obtained.
5. Release the
Alarm Silence
button. The tone stops.
Summary of Contents for Nellcor OxiMax N-560
