Covidien Nellcor OxiMax N-560, Service Manual

Page: 51 / 158

Audible Alarm Settings and Service Functions
N-560 Service Manual
41
Menu Item 14 (Alarm Sound Style Select)
This menu item is used to select the alarm sound style. With menu item 14
selected, press the
SatSeconds
Alarm Limit button, then use the
Adjust Up
or
Adjust Down
button to scroll to the desired option.
• Option 1 = Nellcor style
• Option 2 = sound in accordance with IEC 60601-1-8
• Option 3 = sound in accordance with EN 475
When the desired option is indicated in the %SpO
2
display, press the
SatSeconds
Alarm Limit button to set the current selection. The N-560 sounds
a confirmation tone.
Setting Institutional Defaults (Sample)
Set alarm limits to the values established by your facility. After all alarm
limits are set, you will access menu Item 9 to set the alarm limit values to
institutional defaults. The following default values may be set:
• Alarm Suspend (30, 60, 90, 120 seconds)
• Alarm Silence Behavior (silence off, sound reminder, do not allow
OFF)
• Alarm Volume (1 to 10)
• Baud Rate (2400, 9600, 19200)
• Data Port Mode (ASCII)
• Pulse Beep Volume (0 to 10)
• Pulse Rate Upper Alarm Limit (lower limit plus one to 250 bpm)
• Pulse Rate Lower Alarm Limit (30 bpm to upper limit minus one)
•
SatSeconds
(OFF, 10, 25, 50, 100)
• SpO
2
Upper Alarm Limit (lower limit plus one to 100%)
• SpO
2
Lower Limit (20% to upper limit minus one)
1. Disconnect the sensor from the N-560.