COVANA OASIS COVER, Owner'S Manual, Page: 47 / 82

OASIS COVER page-
45
ELECTRICAL CONNECTIONS
This section shows you how to connect electrical
wiring to operate the cover.
RISK OF ELECTROCUTION
CAUTION
All electrical work should be done by a certified
electrician, otherwise the certification and warranty
will be void. Furthermore, any modifications to the
electrical components will also void the warranty.
DANGER
Failure to comply with these instructions may
result in death by electrocution or serious injury
DANGER
l
Disconnect or turn off and secure all power
supplies before starting any intervention on the
cover.
l
A circuit breaker needs to be incorporated into
the fixed wiring at the time of installation. This
circuit breaker must be accessible to the user or
service technician to turn the power off for future
maintenance or repair.
l
Only a certified electrical contractor may
perform any electrical maintenance on the
cover.
The wiring must comply with all
applicable local electrical regulations.
l
The operator must be connected to a circuit that
is protected by a dedicated ground fault circuit
interrupter
(GFCI) that complies with all
applicable local electrical codes and regulations.
l
Install the cover in such a way that drainage
directs water away from the electrical and the
mechanical components at the base.
l
Do not connect any auxiliary components to the
electrical system of the cover unless they have
been approved by Covana.
l
Replace electrical components with original
components provided or approved by Covana.
Ask your dealer for replacement parts.
l
To reduce the risk of electrical shock, replace a
damaged electrical cord immediately. Failure to
do so may result in death or serious personal
injury due to electrocution.
l
Do not bury the electrical wires into the ground
unless using a direct-burial underground cable.
Not respecting this precaution may result in
death,
or serious personal injury due to
electrocution.
241146 OWNER'S MANUAL REVISION 1