
page-
26
OASIS COVER
FIGURE 29: COVER BRACKET REMOVAL
19. Use the Robertson screwdriver to remove the
three #8 x 1½″ screws holding both side
panels to the bottom of the crate see
.
CAUTION
Remove side panels with care. The side panels
could fall on the cover.
FIGURE 30: SIDE PANEL SCREW REMOVAL
20. Pivot the side panels by gently prying them
outward; lay the panels down on the ground
see
.
CAUTION
Do not remove the side panels completely, doing
so may damage the cover
FIGURE 31: PIVOT GENTLY THE SIDE PANELS
21. Pull the bottom section out, making sure that
it does not interfere with the cover. If it does,
gently lift the cover near the bottom section
and continue pulling it out see
CAUTION
Do not flip the bottom section, this might scratch
the cover if the nails are protruding from the wood.
Pulling the bottom section is the best method to
ensure no aesthetic damage.
Flatten any protruding nails.
FIGURE 32: BOTTOM SECTION REMOVAL
241146
OWNER'S MANUAL
REVISION 1
Summary of Contents for OASIS COVER
