8
1.
2.
3.
4.
Rinsing, Cleaning, and Draining
To prolong the lifetime of the machine, it is recommended that the unit be
cleaned and sanitized manually about every six months.
To clean the outside of the unit
Use a disinfectant of your choice to wipe down the outside of the machine.
Disinfectant does not come with this unit. It can be purchased separately
from a local store.
To rinse the inside of the unit
The machine has been disinfected prior to departing from the factory. Howev-
er, it is recommended to rinse and drain the unit prior to installation.
Remove the white cold water tank cover and the separator.
Pour 0.6 gallons of clean water into the cold tank. (The cold water tank
is the open cylinder that the white cover was removed from).
Place a large bucket beneath the drain outlet located on the back of
the unit. Remove the drain cover and allow the water to drain from the
unit. W
ater will start flowing as soon as the drain cover is removed.
The dispenser will heat water to a temperature of
WARNING
approximately 194°F. It can cause severe burns if not handled carefully.
Please use caution while operating and cleaning. Please allow ample time
for any hot water inside the machine to cool down before draining it.
Before cleaning, make sure that the cooling switch and heating switch
are in the off (O) position and unplug the machine.
Remove the two screws located on the back (at the top, in line with the
switches) of the cooler. Remove the top cover by lifting at an angle and
pull off.
Pour fresh water into
cold water tank.
Remove plastic
drain plug cover
