10
USE GUIDE
Guidance on Unpacking and Installation
1. Turn off the current cold water supply that is
the source of water to your sink.
2. Disconnect the current cold water supply line
under your sink.
3. Connect the Metal Adapter with Valve between
the cold water supply line and cold water valve.
4. Remove the nut from the Metal Adapter and
insert the PE Tubing through the nut. Slide the
PE Tubing onto the protruding part of the
Adapter where the nut was located until it
reaches the threading. The PE pipe should
use the new pipe that comes with the product,
and the old hose assembly cannot be reused.
5. Screw the nut tightly into place to keep the PE
Tubing securely connected to the Metal Adapter
with Valve. Make sure the Valve is in the off
position (perpendicular to the PE Tubing).
