9
5.
1.
3.
4.
5.
Once water is completely drained, reposition the drain cover, cold tank
cover and the top cover. Ensure that the pipes and wires are connected
properly and you may use the purifier as normal.
Cleaning
：
The purifier will heat water to a temperature of
approximately 194°F. It can cause severe burns if not handled carefully.
Please use caution while operating and cleaning. Please allow ample time
for any hot water inside the machine to cool down before draining it.
Unscrew the top cover and lift off the cold tank lid.
2. Place a large bucket beneath the drain outlet located on the back of the
unit. Remove the drain cover and allow the water to drain from the unit.
Water will start flowing as soon as the drain cover is removed.
To remove mineral deposits from the water system, mix 1-gallon of water
with 200 grams of citric acid crystals (not included) or a citric acid cleaning
solution of your choice.
WARNING
Once water is completely drained, reposition the drain cover so water
does not drain into bucket.
Put the mixture into the machine's cold tank.
Plug in the power cord and turn on (I) the heating switch . Allow the
water to heat for 15 minutes.
6. Turn off the heating switch and allow the liquid mixture to cool down for
60 minutes.
7. Drain the liquid from the drain outlet. Flush water system with fresh water
two or three times by following the rinsing instructions above. Only
disassemble parts mentioned to avoid damaging the machine.
